- Allows you to use the b-ready stroller with infant car seats made by other major manufacturers
- This adapter is designed to work with chicco key fit, chicco key fit 30, graco snugride 32, and graco snugride 35 attachment systems
- Requires britax b-ready lower infant car seat adapter for use in second seating position
- Kindly read through the user guide below, for installation assistance
Works with my Graco SnugRide car seat (holds infants up to 22lbs)
I have the Graco Travel System in Barcelona Bluegrass. It comes with the stroller and a Graco SnugRide carseat that holds infants up to 22 pounds. http://www.amazon.com/Graco-Travel-System-Barcelona-Bluegrass/dp/B002RL7UQC/ref=sr_1_1?ie=UTF8&qid;=1348523756&sr;=8-1&keywords;=graco+barcelonaI was worried that the car seat wouldn’t fit since its wasn’t the Graco SnugRide 32 or 35. I couldn’t find any reviews that stated this type of car seat would fit this adapter either. I was very excited to see that it snaps right in with no problems. The adapter comes with safety straps as well to ensure an even more secure fit. I really couldn’t be happier!
Our daughter was quickly approaching 10 lbs and carrying her in the carseat was getting old. Man we are glad we bought this! We have the B-Agile and Keyfit 30, it fits perfect. It’s nice b/c it snaps in and also has the strap to secure it. We haven’t used the strap much b/c it seems to be pretty secure. The stroller isn’t as smooth with a carseat snapped in, but still easy to maneuver. We were so thankful to have this over the holidays while shopping! Just buy it and quit hurting your back!
Use with our Chicco KeyFit30
This is great for clicking in our Chicco carseat right into the stroller. The only reason I gave it minus 1 star was because we cannot fold up the stroller as small as before without taking the adapter off. I have a very small trunk (Aveo 9 hatchback) and it makes it difficult to get in there. Other than that it is great!
I have a safety first air35 car seat and I have to use the straps to secure it into my Britax B-Ready stroller with this adapter. It seems very secure, but I hate strapping it instead of something that clicks in, but with so many makes of car seat, it would be impossible for Britax to make an adaptor for each, so this will do fine until she outgrows the car seat and we can get her into the very snazzy stroller!
I adore my Britax B-Ready stroller, and wanted to use my car seat on the stroller (so handy when they are infants), but I did not like the Britax infant car seat. I went with the Chicco Key Fit car seat (which we love), and this adapter frame works perfectly. It’s very easy to use, and until we began using the stroller seat, we left this on the frame, in our trunk. If you want a different car seat, but love the Britax stroller, this is worth the purchase!
Does Not Work for Graco Click Connect Carriers!
Attention: this does not work for Graco Click Connect Car Seats! Contrary to the advertisement, these work only with the Graco Classic Connect, not the Click Connect. For this reason I had to return both the stroller and the adapter. Also, although not pictured, this adapter uses a strap that fits over the infant carrier. While I think in most situations you could get away with not using it, I’m not wild about having to secure the strap each time. However, based, on my research, this seems to be a common trait amongst stroller adapters. In my opinion, find a stroller and infant carrier that are of the same brand and compatible to save yourself the hassle of these types of adapters.All that being said, I really liked the stroller and wish I could have kept it. It was quite smooth, well made, and not too bulky. Oh well.
Confused as to how this works with my Peg Perego 30/30
I just received this in the mail along with the lower car car seat adaptor bar and I’ve been searching online for some advice on how to put it together. I’m also looking for videos online and I can’t seem to find any.. I really don’t want to have to buy a Britax car seat because in my opinion, the Peg Perego is a fantastic infant car seat.. any advice?
Works with the ORIGINAL Graco Snugride!
I am super happy as I had purchased a Britax B-Agile Stroller (which I love!!) and I had the original Graco Snugride that has a year left before it expires from my last baby and this adapter works great! If I had to do it all over again I would have just purchased the Britax B-Agile Travel System. But I didn’t want to buy another infant carrier.
Wobbles a bit
We have a similar product for a BOB stroller, and it locks in much tighter. This works fine, but wobbles a bit. Easy to use, though. You’ll want to use the little extenders that come with the B-Ready if you have that model. So don’t throw them away!
Works with Peg Perego car seat.
Works with my Peg Perego Pliko P3 car seat. Just put the seat in and strap it (strap comes with the adapter). The seat is secure enough not to fall oit, even without being clicked into the adapter.
We were given a pair of carseats with bases (Graco Snugride Classic Connect 35), but really wanted to use the Britax Be Agile (which we LOVE). This works perfectly, allowing us to snap in the carseat and go.
Got to have!
Easy to adapt to the frame of my stroller. Love how easy it is to transfer the car seat with my sleeping baby without having to disturb his sleep.
Must have for getting the most out of your Britax stroller. I also purchased the bottom second seat seat to convert my B-Ready to a double stroller. This worked great with no issue with our existing Chicco carseat from 2011. I didn’t give it 5 stars because of cost. Considering the short lifespan of the product it should cost less.
Hard to unlock carseat from stroller
Great idea that this can accommodate a chicco car seat for the b ready double stroller, although I find it so hard to release the carseat once it is snapped in. Most times I have to undo the adapter and place the whole thing on the floor, then release the carseat. This can be inconvenient when trying to unload the kids into the car. It also doesn’t fold with my carseat, so it has to be removed before I can fold the stroller and load the car. Again, somewhat of a nuisance when trying to hurriedly load kids in the car.
This is a must if you have a Britax B-ready and a newborn. My Graco 35 fit great! It was fairly secure, I rarely feel the need to use the strap.
Great adapter for my b-ready, holds the car seat in place and does exactly what its designed to do. I also use this with the second seat and there is plenty of room for my toddler below this adapter and car seat attached
I like the idea but it doesnt feel sturdy enough. The carrier still tends to wiggle lightly even with straps holding it down. Its a good conversion adapter but i think it could use some improvements
didn’t feel secure
I bought this for my B-Agile stroller and Graco infant carrier. The adapter snapped in easily and doesn’t get in the way when you fold up the stroller. The infant carrier had to be removed to fold the stroller up. I didn’t like that the only thing securing the carried to the adapter was the one little harness which kept getting in the way of my little guy’s hands when he wanted to play with his toys. I think some type of side clamp that doesn’t have to go across baby’s lap would work better and make for less unbuckling if little one desires a quick extraction.
Best stroller and set up by far especially for twins!! My fourth stroller and last stroller. Love it. Simple. Perfect.
Works well for chicco key fit car seat
I was skeptical that it would work correctly and was pleasantly surprised that it works great! Chicco Car seat clicks right in and you use a strap to double secure the seat. I recommend this to anyone! It still folds up still, it adds a little more mass but works as it should!
Totally worth the $
We or the stroller as a gift so for under $40 rhis was a no brainer. Easy to install and remove from the stroller. Works great with our Graco snug ride 30.
I bought this adapter so that I could sell my snap-and-go. I love how it allows me to face the baby toward me or away from me by just turning the adapter around. It easily snaps in and feels very sturdy. I would very much recommend it.
Works with Chicco Keyfit 30
This product works as stated between my Britax B-ready stroller and Chicco Keyfit 30 car seat. There is a strap that you put through the seat belt track on the car seat for added security. When using with the B-ready, you don’t need the Britax infant car seat receivers.Note that if you want to use this adapter for the lower level of the B-ready — you also need the Britax B-Ready Lower Infant Car Seat Adapter.