We tried to utilize this bath support to bathe my infant twin grandchildren, 8 lbs and 12 lbs. My daughter-in-law will not use it after discovering it is not deep enough for her to feel that the babies are securely held, and it holds very little water. She ended up buying another mfr’s brand that cradles the baby much better. This is advertised up to 30 lbs, but I am skeptical that a baby that size would even fit.

The Angelcare Bath Support is really a nice support for baby. It has a very lightweight, yet sturdy design that doesn’t feel flimsy. The base has a non-slip ring around it to keep it from sliding around, even in tubs with no mat or strips. The way it holds baby is fantastic, the mesh is firm, yet soft, so you won’t have to worry about pressure points making the baby uncomfortable, and the mesh makes sure that baby doesn’t sit in any pools of water. There isn’t else to say abouts it, it’s a great design and there’s nothing not to love about it.

Over the last 4 months I have been looking for the perfect bath support or tub in preparation for our little girl. I came across this product in a magazine and after reading positive reviews decided it was worth a shot. Although she’s only had 4 baths and we are new to being parents, I couldn’t imagine a better product for bath time. The mesh is great for quickly rinsing all of the soap off of her, and she seems very happy and comfortable with the feel of it on her back.I did see one review where someone was concerned with their baby falling off of the support, and I have to say I could never see that happening. There is quite a nice pocket in the mesh for baby and it is soft and flexible, also the lip at the bottom holds baby in even better. Very nice product!

This bumper has not even been used since it never was able to hold in air due to it being defective.Sadly it arrived right before the holidays and we only had 15 days for returns. Returns during the busiest week of the year? YEAH RIGHT! Next time I will make sure I have a 30 day return (at least that) before I make another purchase.

Great customer service by manufacture. One I got did not hold air from day one. They were happy to help. It does not stick to my tub.

I love this, my 10 month old twin boys love the pictures and touch and play with all the colorful characters during every bath. It gives me the security I need to bathe them together without worrying about one tipping over and bumping their head on the bath tub wall. Plus, right now they are a perfect fit to lay side to side across the tub with the bumper behind their back and feet on the other side so I can wash all the “important parts” easily. The bumper supports them and keeps them from slipping down in the water while I wash.The only negative is that it rips too easily. The suction cups hold well, but the boys grab the top and are pulling up. When they pull on it, instead of the suction cup just releasing, the plastic behind it tears away and now there is a BIG hole the size of the suction cup base. My housekeeper also ripped one trying to take it off the tub to clean the tub. You have to grab each suction cup and remove it without pulling on the bumper itself at all.I can do that, my housekeeper can do that, but little one’s don’t get the concept.I wish this was made of a covered foam like pool floats for adults are. It would be perfect if it was. So now I have only one bumper for the 2nd time (I’ve already replaced it once in the first 2 months we’ve had it). I am debating on whether to spend the money again and buy another set.If it were made of better material I would give it a 5 star rating. It just rips too easily in an area that should be reinforced to handle the stress of removing the bumper suction cups. It’s not like we are abusing it.

We ended up returning the diaper once we saw the design. The prints are nice and the fabric is soft… butThe inner lining doesn’t have any protective area in the front so we know hat baby’s tummy will be super wet especially since he’s a tummy sleeper.We didn’t like that there wasn’t a flap that covered the pocket opening. The opening is at the back seam of the diaper and we just felt that it would allow wetness out.So we went with our gut and returned them without using them since the price is a little steep.

When we began using cloth pocket diapers we started with Blueberry, FuzziBunz, BumGenius, Happy Heiny, Oh Katy, and Charlie Banana. This is my review for Blueberry compared to the rest of these brands.The Blueberry diapers have a snap rise setting, are rear pocket loading, and have a microfleece lining and 2 micro fiber inserts.I really like these diapers just as much as all of the other brands I tested. For whatever reason these are so much easier to load than most of the diapers which is nice when you’re stuffing 10-20 diapers at a time, I’m not sure if it’s because the fleece isn’t as tightly sewn or if the crotch is actually wider. We’ve had no issues with leaks with this brand either.Having a boy I’ve personally found the rear loading pocket diapers (also Happy Heiny, BumGenius, FuzziBunz)to be better as most of the wetness is in the front so sticking your hand in there to pull the inserts out isn’t pleasant, it’s less bad in the back.I also found out that I like the elastic sizing (like Charlie Banana & FuzziBunz) over the snap rise settings when you have a squirmy baby, but that doesn’t change the fact that I’m continuing to purchase and use the snap rise diapers too.Overall these are great pocket diapers (honestly they all are, it’s just a matter of personal preference) and this print is absolutely adorable!

The fit, material and pattern of this diaper are fantastic. The snaps are perfectly located and easy to fasten around chubby legs and tummy. However the dang thing leaks, easily. There’s something about the seal around the waist, not elastic-y enough maybe? I only use this one during the daytime when I know baby will be sitting upright, otherwise we’re in for a pee disaster.